Fuel Planning; Fuel Planning; Fuel Planning Page; Fuel Planning Modes - Garmin GPS 175 Pilot's Manual

Fuel Planning

View fuel conditions along any flight plan (active or programmed)
or between two waypoints (including the active direct-to).
4.3

Fuel Planning Page

4.3.1

Fuel Planning Modes

POINT-TO-POINT MODE
Calculate fuel between two
waypoints in the database, or
between the aircraft's present
position and a selected waypoint.
Use the mode specific controls to define the flight path (leg or route). Required input
values are dependent upon mode selection.
Fuel on board, fuel flow, and ground speed data are required independent of mode
selection.
For Planning Purposes Only
•
Fuel on Board and Fuel Flow are pilot specified values. They are not a direct
indication of actual aircraft fuel on board or fuel flow.
•
Fuel Required to <destination> is a calculated prediction based on pilot
specified values. It is not a direct indication of actual fuel quantity once the
aircraft reaches its destination.
•
All data entries on this page are used exclusively by the Fuel Planning app.
•
Fuel computations are for planning purposes only.
190-02207-02 Rev. B
The fuel planning feature computes fuel
conditions based on route, ground speed,
fuel on board, and fuel flow.
Tapping Mode toggles the active fuel planning mode between
Point to Point and Flight Plan. Point to Point is the default mode
setting.
GPS 175/GNX 375 Pilot's Guide
FLIGHT PLAN MODE
Calculate fuel for a specific flight plan
leg, or for the cumulative
flight plan.
Planning
4-5