Download Print this page
Garmin GPS 175 Service Bulletin

Garmin GPS 175 Service Bulletin

Main software version 3.10
Hide thumbs Also See for GPS 175:

Advertisement

Quick Links

st
1200 E. 151
Street
Olathe, KS 66062
913-397-8200
TO:
Non-Certified Aircraft Owners Performing the Subject Upgrade
DATE:
April 24, 2020
SUBJECT:
GPS 175/GNX 375/GNC 355 Main Software Version 3.10
REVISION B:
Added GNX 375 Steps
CERTIFICATION
AUTHORIZATION:
TSO Authorization Software for Non-Certified Aircraft (see Approval section
for details)
______________________________________________
Note: This Service Bulletin is provided solely for the purpose of installing the Subject software in
non-certified aircraft. This Service Bulletin is not intended for software installation on certified aircraft whose
maintenance must be performed by persons authorized in accordance with 14 CFR 43.3. This software update
is NOT an owner/operator eligible activity as "preventative maintenance" under 14 CFR 43 for FAA certified
aircraft. Non-certified aircraft owners who, upon reviewing these instructions, do not feel qualified to perform
this upgrade without any assistance should contact a Garmin dealer to perform this important upgrade.
PRODUCTS AFFECTED
GPS 175, GNC 355, and GNX 375 products listed below with Main Software Version 3.03 and earlier are
affected:
NOTE
The software installation procedure documented in this bulletin can be used to load
Software Version 3.10 from a newer software version.
Except as expressly provided herein, no part of this document may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage
medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this
document and of any revision to this document onto a hard drive or other electronic storage medium to be viewed and to print one copy of this document
or of any revision hereto, provided that such electronic or printed copy of this document or revision must contain the complete text of this copyright notice
and provided further that any unauthorized commercial distribution of this document or any revision hereto is strictly prohibited.
Service Bulletin 2048
April 24, 2020
SERVICE BULLETIN
(Non-Certified Aircraft)
NO.: 2048 Rev B
Table 1. Products Affected
Model
GPS 175
GNX 375
GNC 355
GNC 355A
© 2020
Garmin Ltd. or its subsidiaries
All Rights Reserved
Appliance P/N
011-04377-00
011-04378-00
011-04956-00
011-04956-30
Page 1-10
Revision B

Advertisement

loading
Need help?

Need help?

Do you have a question about the GPS 175 and is the answer not in the manual?

Questions and answers

Summary of Contents for Garmin GPS 175

  • Page 1 Except as expressly provided herein, no part of this document may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this...
  • Page 2 Updates NEXRAD “No Coverage” overlay to be semi-transparent • Adds support for database SYNC for transferring databases between Garmin displays – transfer and receive from any GI 275, GPS 175, GNX 375, or GNC 355 and receive only from G500 TXi/ G600 TXi •...
  • Page 3: Warranty Information

    GPS 175 TSO Installation Manual 190-02207-04 GNX 375 TSO Installation Manual 190-02488-00 GNC 355/355A TSO Installation Manual 190-02488-01 GPS 175/GNC 355/GNX 375 Pilot’s Guide MANPOWER One (1) hour labor per unit installed. WARRANTY INFORMATION This modification is not warranty reimbursable. Service Bulletin 2048...
  • Page 4: Software Included

    Upgrade GNC 355 main software to version 3.10 • Load GPS 175/ GNX 375/GNC 355 main software 3.10 from a newer main software version GPS 175/GNX 375/GNC 355 loader cards contain Main Software Version 3.10 and the following software versions for other product software components: Table 3.
  • Page 5 It is highly recommended to record the configuration settings before proceeding. 2. Put the 3.10 loader card into the card slot on the right side of the GPS 175/GNX 375/GNC 355. 3. Push and hold the inner knob, and push the power key to enter Configuration Mode.
  • Page 6 6. Make sure the “On Card” software version is shown for each of the following: • GPS 175 Main Software Version 3.10 Figure 4. GPS 175 Main Software • GNC 355 Main Software Version 3.10 and COM Software Version 2.30 Figure 5.
  • Page 7 • GNX 375 Main Software Version 3.10 and Transponder Software Version 2.54 Figure 7. GNX 375 Main Software Version Figure 8. GNX 375 Transponder Software Version 7. Select the software items to be uploaded. A green check mark will appear next to each software item that is selected.
  • Page 8 Part Three: GPS 175/GNX 375/GNC 355 Software Verification 1. Power up the unit into Normal Mode. 2. Touch System. 3. Touch System Status. 4. Verify the following applicable software version: • GPS 175 ◦ Main Software Version 3.10 ◦ GPS/WAAS Software Version 8.0 •...
  • Page 9 10. Touch Setup. Figure 11. Setup 11. Touch XPDR. Figure 12. XPDR 12. Touch Clear XPDR Settings. Figure 13. Clear XPDR Settings 13. Touch OK to reset all XPDR Settings. Figure 14. Reset All XPDR Settings Service Bulletin 2048 Page 9-10 April 24, 2020 Revision B...
  • Page 10: Material Information

    17. Make sure config mode fault is cleared and transponder config settings are correct. RETURN TO SERVICE TEST PROCEDURE Successful completion of Part Three of this bulletin is adequate to return the GPS 175/GNX 375/GNC 355 installation to service. MATERIAL INFORMATION •...

This manual is also suitable for:

Gnx 375Gnc 355