Advantech USM-110 User Manual page 36

Step 4.Open the server system installed in your server PC, select the [Client Device],
then click the [New] on the right-upper corner to add the client device.
Device Edit Page [Figure 10]:
Step 5.Key the device name in [Name] field.
Step 6.The [Client ID] field is based on the information set in client system. Two
options. Option1. If the [Use custom ID] is selected, please input the [Custom
ID] of client system. Option2. If the [Use custom ID] is not selected, please
input the [Client ID] of client system
Step 7.Click [Save & Exit]
Step 8.Back to [Client Device], check the [status] column of the device list, the green
indicator say you finish adding one device.
USM-110 User Manual 28