Parameter Management - Allen-Bradley SMC-50 User Manual

Parameter Management

3. Select the PARAM ACCESS LEVEL option, then press the Enter (#5)
key. The Dev Parameter screen appears.
Allen-Bradley
Stopped
0 Amps
DEV PARAM
Linear List
File-Group
00
Changed Parameters
ESC
Param Access Level
4. Use the up or down arrow to scroll up or down until you reach the desired
access level
5. Press Enter (#5) to view that access level.
Before you begin programming, it is important to understand how the memory is
structured within the SMC-50 and used on power-up and during normal
operation.
Figure 43 - Memory Block Diagram
EEPROM
20-HIM-A6
Network
Connection
Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019
AUTO
F
SMC-50 Control Module Memory
RAM
PC Software
Programming Chapter 4
ROM
87