Optional Him Operation; Overview; Him Control Buttons - Allen-Bradley SMC-50 User Manual

Overview

HIM Control Buttons

Optional HIM Operation

The SMC-50 control module offers a variety of unique control options that
provide enhanced motor starting and stopping capabilities.
The control buttons available with the Bulletin 20-HIM-A6 LCD modules are
compatible with the control options on the controller.
detail the functionality of each control button. For additional details on using the
20-HIM-A6, see the user manual, publication 20HIM-UM001.
IMPORTANT You must enable the logic mask port before you initiate control commands
except for Stop, which always initiate a Coast-to-Stop command. See
Enable on page 137
ATTENTION: The Bulletin 20-HIM-A6 LCD module's stop push button is not
intended to be used as an emergency stop. See applicable standards for
emergency stop requirements.
Table 41 - 20-HIM-A6 Control Button Functionality, Standard Control
Option Action
Soft Stop
Current Limit
Full Voltage
Linear Speed
Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019
Table 41
for instructions.
Operation When Pressed
The green start button begins motor acceleration to full speed.
The red stop button provides a coast stop, and/or reset a fault.
This button brings up the Control Screen to enable the stop option
maneuver. See the HIM Control Screen on page 132
6
Chapter
and Table 42
Control
section.
131