Related Manuals for Billy Goat DL2500SMM
Summary of Contents for Billy Goat DL2500SMM
- Page 1 MM Owner’s Manual BILLY GOAT MULCH MULE DEBRIS LOADER VACUUM Owner's Manual DL2500SMM Part No 791108 Form No F111008B...
-
Page 2: Table Of Contents
ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. -
Page 3: Serial Plate Data And Specifications
SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications Engine: HP Engine: Model Engine: Type Engine: Fuel Capacity Engine: Oil Capacity Total Unit Weight: Max operating slope Overall Height Overall Height with optional trailer Overall Width... -
Page 4: General Safety
This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT DL VACUUM. This symbol indicates the engine oil level should be checked before operating this equipment. - Page 5 DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running.
-
Page 6: Sound And Vibration
SOUND Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 6/18/07 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. -
Page 7: Instruction Labels
INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. -
Page 8: Packing Checklist & Assembly
PACKING CHECKLIST Your Billy Goat is shipped from the factory in two cartons (one for the unit and one for the exhaust hose) and is completely assembled except for the exhaust elbow, nozzle, handle loop for nozzle, hose booms, hose bands, hose coupler, hose clamps exhaust hose and related hardware. -
Page 9: Operation
MM Owner’s Manual ASSEMBLY 1. SECURELY ATTACH unit to the bed of a truck or to a trailer, so that the exhaust discharges into an enclosed container. NOTE: This unit must be securely mounted to the bed of a truck or to a trailer before operating. 2. - Page 10 MOUNTING: Main unit GENERAL: Unit must be securely mounted to a trailer, truck bed, or other similar surface before use. Do not use this unit in a freestanding position. Unit is not stable until it has been secured in place. Secure unit by bolting through the base of the unit and through the mounting surface using 3/8"...
- Page 11 VACUUMING OPERATION EXHAUST DIRECTION & DISTANCE: Exhaust direction and distance are controlled by the rotation of the exhaust elbow. Typically debris is aimed to discharge to the rear of the container. The direction of discharge is adjusted by turning the crank on the exhaust elbow clamp and rotating the elbow to the desired direction.
-
Page 12: Maintenance
Note: The 3/4"-16 x 3" bolt can be ordered from your local Billy Goat Dealer (part no. 440192). 8. When impeller is free of the engine shaft, align impeller with the opening and pull it straight out of the housing. -
Page 13: Troubleshooting And Warranty Procedure
Warranty Claim. • The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. • The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. -
Page 14: Illustrated Parts & Parts Lists
MM Owner’s Manual PARTS DRAWING MM Part No 791108 Form No F111008B... -
Page 15: Parts List
PARTS LIST ITEM DESCRIPTION LABEL WARNING EXPLOSIVE FUEL LABEL OPEI WARNING WASHER TWISTED LOCK 7/16" GRIP 1 1/4 ID X 9.5 LONG STRAIN RELIEF HEYCO 1244 ENGINE 25 HP SUBARU TUBE BOOM ARM DL CLAMP GAS TANK CABLE BATTERY RED 26" CABLE BATTERY BLACK 10"... -
Page 16: Maintenance Record
MM Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 791108 Form No F111008B...