縫製品的拆卸方法 Disassembling Method For Sewing Products - Graco MILESTONE LX User Manual

縫製品的拆卸方法 Disassembling method for sewing products
A
〈護頭枕套 Headrest Pad〉
若有需要，可將頭枕靠墊拆下清洗。If needed, headrest pad may be removed for cleaning.
Ⓐ需拆下時，請解開護頭枕套上的固定扣，再將肩帶抽出。
To remove, unsnap the pad to pull the harness straps out.
Ⓑ將位於高度調節鈕附近的塑膠固定片拉出溝槽口。
Pull the plastic tab out of the slots just below the red adjustment handle.
Ⓒ取下護頭枕兩側勾環的鬆緊帶。
Remove the elastic straps from the hooks on both sides of the headrest.
Ⓓ將整塊護頭枕套取下。Pull pad off of headrest.
※安裝時，請依據上述步驟之相反順序操作。
注意
以冷水機洗時，建議放入洗衣袋中，並以低速弱洗程序洗滌。並請平放自然風乾，請勿使
用漂白水。
CAUTION
Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH.
B
Reverse the steps to reattach the cover on the headrest.
C
38
D