Graco MILESTONE LX User Manual page 16

前向安裝方式 Install the Forward-Facing
4
❹將汽車安全帶穿過前向安全帶溝槽（紅色標籤指示處）
後扣緊，確實將安全帶扣入相應的固定插扣，確認安全
帶順平沒有扭曲反折。
Thread vehicle seat belt through the forward-facing belt
path (marked with an bright red label) and buckle it.
Make sure buckle and seat belt are in line with each
other. The seat belt should lay as flat as possible and
not be twisted.
❺打開安全帶固定夾（如圖所示），將汽車肩部安全帶穿
入兒童保護裝置側面的安全帶固定夾。
Open tab on shoulder belt lock-off as shown. Insert
shoulder seat belt into shoulder belt lock-off on side of
child restraint.
5
15
CAUTION
注意