Graco MILESTONE LX User Manual page 21

使用時的確認 Verification of use
3
〈調整固定扣座位置 Adjust the Buckle Position〉
❸若需要調整股帶位置時，請從安全座椅正面掀起座布椅墊後，將可看見固定扣座的調整卡槽。
To Adjust, Lift the Lower Seat Pad From Front of Car Seat to Expose The Buckle Slots.
❹將固定扣座的織帶轉向側面，移動至三個調整孔位中所需的位置，並確認已將織帶轉正固定。
Turn Buckle Strap Sideways and Slide to Desired Slot, Make sure buckle strap is in one of the
three positions.
❺裝回椅墊，確定固定扣座已穿過椅墊與塑膠椅殼的同一個導孔位置。
Replace Seat Pad, Making Sure the Buckle Goes Through the Same Slot in the Seat Pad as in
the Plastic Shell.
警告
調整時請注意避免夾傷手指等部位。
Careful not to hurt finger during adjust the Buckle.
WARNING
4
20
5