Graco MILESTONE LX User Manual page 13

後向安裝方式 Install the Rear-Facing
7
❼將汽車肩部安全帶穿過座椅背面之藍色標籤指示的後向肩帶導向器。確認安全帶順平沒有扭曲反
折。Thread the shoulder belt through the rear-facing shoulder belt guide on the back of the seat
marked with blue labels.The seat belt should lay as flat as possible and not be twisted.
某些汽車安全帶可能於穿過安全座椅的椅背時長度略為不足，此時請先將座椅靠背向汽車座
椅前傾(如圖示)，以利汽車安全帶繞過椅背崁入肩帶導向器內，完成後再將安全座椅放回正
注意
確位置。
In case the seat belt is not long enough when installing the carseat, please lean the carseat
CAUTION
toward the seat back so the seat belt can route through the seatbelt path on the carseat back
completely, once buckled up, please restore the carseat position.
❽拉緊汽車座椅的安全帶。確實朝安全座椅中央壓下，然後拉動收緊汽車肩部安全帶，將鬆動露出
的安全帶收回捲收器中。
Tighten the Vehicle Seat Belt. Press down firmly in the center of the car seat. Pull on the shoulder
belt to tighten while feeding the slack back in the retractor.
注意 CAUTION
12
8