Graco MILESTONE LX User Manual page 12

後向安裝方式 Install the Rear-Facing
4
❹解開安全座椅椅墊背面的固定扣(4處)。
Unsnap the pad from back (4 locations).
❺將坐墊往前拉出至露出塑膠骨架結構。
Pull lower seat pad forward to expose the plastic shell.
❻將汽車腰部安全帶穿過後向安全帶溝槽（藍色標籤指示的部位）後扣緊。確認安全帶順平沒有扭
曲反折，並請確實將安全帶扣入相應的固定插扣。。
Thread vehicle lap seat belt through the rear-facing belt path (marked with a blue label) and buckle
it. The seat belt should lay as flat as possible and not be twisted. Make sure buckle and seat belt
are in line with each other.
注意
CAUTION
5
11
6