Port Group Interface - H3C S6520-SI Series Command Reference Manual

port group interface

Use port group interface to bind a physical interface to an IRF port.
Use undo port group interface to remove the binding of a physical interface to an IRF port.
Syntax
port group interface interface-type interface-number
undo port group interface interface-name
Default
No physical interfaces are bound to an IRF port.
Views
IRF port view
Predefined user roles
network-admin
Parameters
interface-type interface-number : Specifies a physical interface by its type and number.
interface-name : Specifies a physical interface in the interface-typeinterface-number
format. No space is allowed between the interface-type and interface-number
arguments.
Usage guidelines
Execute this command multiple times to bind multiple physical interfaces to an IRF port. You can bind
a maximum of four physical interfaces to an IRF port.
Use the shutdown command to shut down a physical interface before you bind it to or remove it
from an IRF port. To bring up the physical interface after a binding or binding removal operation, use
the undo shutdown command.
The system does not dynamically remove IRF port bindings when IRF links are lost, for example,
because an interface card is removed. To remove IRF port bindings, you must use the undo port
group interface command.
For more information about IRF port binding requirements, see Virtual Technologies Configuration
Guide.
Examples
# Bind Ten-GigabitEthernet 1/0/1 to IRF-port 1/1 on IRF member 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] shutdown
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] irf-port 1/1
[Sysname-irf-port1/1] port group interface ten-gigabitethernet 1/0/1
[Sysname-irf-port1/1] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo shutdown
Related commands
irf-port
26