Danfoss AME 110 NL Datasheet

Data Sheet
Actuators for modulating control
AME 110 NL, AME 120 NL

Description

Ordering

SMT/SI
Supply voltage
Type
(V)
AME 110 NL
24 AC
AME 120 NL
Note:
Actuators with 5 m and 10 m cable length are produced on request. Please note this increases lead time.
Spare parts
Length
Type
(m)
5
Cable (24 V)
10
VD.KH.C6.02 © Danfoss 01/2014
The actuators are used together with
automatically balanced combination valve type
AB-QM for DN 10-32.
The actuator can be used with fan coil units,
induction units, small reheaters, recoolers and
zone applications in which hot/cold water is the
controlled medium.
Main data:
• Gap detection at stem up position
• Modulating control
• Force switch-off at stem down position
prevents overload of actuator and valve
• No tools required for mounting
• Maintenance-free lifetime
• Low-noise operation
• Self-positioning process
• Halogen free cables
Speed Cable length
(s/mm) (m)
1,5
24 5,0
10
1,5
12 5,0
10
Code No.
082H8052
082H8054
Code No,
Single Pack Industry Pack
082H8057 082H8067
082H8081 082H8077
082H8098 082H8087
082H8059 /
/ 082H8079
/ 082H8089
1