Hyundai HYT140 User Manual page 9

Once this has been done, you can offer each handlbars upto the support bracket we advise that you get assistance
to hold them in place whilst the fixing bolts and washers are inserted. Push bolts from the
outside of the handlebar then through a spring and flat washer then through the support bracket. Fit the lock nut
onto the bolt. When all nuts/bolts have been fitted you can tighten them all up (using the two supplied 13mm
spanners) to fully secure the handle bars.
2.4.2. Securing the cables.
When the handlebars have been fitted, you must secure the throttle/clutch cables to their respective handlebars,
use the clip that is fitted to each of the handlebars. Making sure that neither of the cables are catching on any
other part of the machine and that they are not tight.
Page 9 Ver 3 - 2017