Hyundai HYT140 User Manual page 11

2.4.5. Depth (drag) bar.
To fit the drag bar you must first remove the spring clip then insert the depth (drag) bar into the depth (drag) bar
fixing hole. Push the spring clip into the hole and align it with one of the three desired slots.
2.4.6. Adjusting the transport wheel.
The transport wheel has two positions, one is for moving the machine into place i.e. wheel down and the other
position is for tilling where the wheel is to be raised. To move the wheel from the DOWN to UP position, pull the
wheel downwards to release from the locking slot. Then move the wheel upwards and allow it to lock into the UP
position locking slot. To drop the wheel reverse the process.
Page 11 Ver 3 - 2017