Hyundai HYT140 User Manual page 10

2.4.3. Clutch cable.
When the handlebars have been fitted you must check that the clutch cable is fitted as image below.
2.4.4. Clutch cable adjustment.
However after use you may need to adjust the setting to cope with wear.
Undo the lock nut and adjust the clutch, by turning the adjusting nut and make minor adjustments.
After each adjustment make sure that the tiller blades rotate when the clutch lever is operated and STOP rotating
when the clutch lever is released. Remember to tighten up the lcok nut
The clutch is factory adjusted.
Page 10 Ver 3 - 2017