Opera on Systems— in.k500 Series Control
Water Care
To set up your desired
filtra on and hea ng
se ngs press the Light key.
A checkmark will appear
on the selected icon to
confirm.
In energy saving mode the
set point will be reduced
by 20 degrees F, which
means that the hea ng
system will not be engaged
unless the temperature
falls to 20 degrees below
the spa's set temperature.
Maintenance
From the se ngs page you can
access the following op ons:
Maintenance reminders
Standby
Use the Up and Down keys to
make a selec on, press the
Light key to confirm selec on.
Keypad Se ngs
Use the Arrow keys to
move to the se ng that
you wish to change. Use
the Light key to modify the
selec on.
The display orienta on
can be changed by
selec ng the contextual
op ons using the Arrow
keys to adjust the
orienta on.
Water Care Modes
Away: In this mode
the spa will always be
in economy; set point
reduced by 20°F and
filtra on reduced.
Beginner: Never in
economy mode and
will run normal 8 hrs
filtra on daily.
Energy Savings: Econo‐
my mode during peak
hrs of day and resume
normal mode on
weekend.
Super Energy Savings:
Always in economy
mode during peak hrs
Weekender: Economy
mode Mon—Fri. Runs
normal on weekend.
Maintenance Reminders
This will remind you of
things like rinsing your spa
or cleaning the filter. Each
task has its own dura on.
The maintenance reminder
menu allows you to verify
the me le before require‐
ment and reset once com‐
plete. Use the Up and Down
key to move through the
list. To reset a task select it
by pressing the Light key.
Control Panel Rim Light
Selec ng this will turn on
or off the topside rim light.
or Bluetooth wireless connec on.
The in.stream Se ngs menu gives you a Bluetooth discon‐
nect op on, an Off/On switch and an audio control on
fader, balance and subwoofer.
The Audio op on will only appear in the menu for keypads
that are set up for an in.stream connec on. The in.stream2
is automa cally detected at power‐up.
Press the Mode key to access your in.stream2.
Turn Power Off/On, and Disconnect, and Fader, Balance and
Subwoofer can be found under the Audio sec on in the
Se ngs menu.
Adjust volume with Up/Down keys.
Use the Last Track and Next Track keys to change the tracks
or FM sta ons.
Standby
This allows you to service
your spa, the pumps will
stop automa cally for 30
minutes and automa cally
start back up a er that
dura on. The screen will
alert you when standby
mode is enabled.
Press the Pump 1 key to
leave standby mode and
restart the spa.
About
This selec on shows
informa on such as the
so ware number and the
revision numbers on the
different components of
your system.
Audio
The audio selec on in the
se ngs menu gives you the
op on to disconnect or un‐
pair your Bluetooth enabled
device. It is also possible to
select Source to use a device
connected by auxiliary cable
Date and Time
Use the arrows to choose
the se ng that you would
like to adjust and select it
by pressing the Light key.
Use the Arrow bu ons to
change the parameters and
the Light key to move
between parameters.
Pressing Key 1 will take you
back to the main se ngs
menu.
WiFi
To connect in.touch module
to a wireless network, use
Up/Down keys to the WiFi
op on in the Se ngs menu
and Light key to select.
Available networks will
appear with color coded
connec on icons.
40