Set Time; Electrical Configuration - PDC spas Luxury Series Owner's Manual

Opera on Systems, Luxury Series — in.k1000 Series Control
Keypad Func ons
Set Time
Here you can change the hour, minute and me format. Simply scroll up and down
the column you want to change, and select the desired value. When done, touch
the calendar icon at the right of the screen.
Keypad Se ngs
Here you can adjust the Temperature Units, Day/Night contrast, and Display
orienta on and language. Simply touch the op on you want to change.
Electrical Configura on
Please do not make changes in this sec on unless you are a qualified electrician.
In this sec on you can change the low‐level configura on, as well as modify the
number of phases and the input current.
About
This sec on shows informa on about the in.k1000 so ware number, and the revision
numbers of the different components of your system.
Set date
Here you can adjust the year, month and date.
Simply scroll up and down the column you want to change, and select the
desired value. When done, touch the calendar icon at the right of the screen.
WiFi (op onal)
This menu allows you to connect your in.touch module to a Wi‐Fi network or to
change its network. To connect your in.touch module to a wireless network, slide the
le wheel un l the desired icon menu is show in the middle screen or press on the
menu name. A er a few seconds the available networks will appear on
the screen, as well as their signal strength. Slide Up or Down the list to select your
network. If the Wi‐Fi network is password protected enter it when prompted. Use
Enter to validate the password. If no password is required the in.touch will connect
automa cally. Once the in.touch module is connected to a Wi‐Fi network a green
check mark will appear in the Wi‐Fi menu, and the network name will appear in the
Se ngs menu.
37