W E Reserv E The Right To Change Execution And Construction - Meiko BTA 240 Operating Instructions Manual

Tray washing machine

Hide thumbs Also See for BTA 240:

Operating instructions manual (14 pages)

Table Of Contents

Table of Contents

Operating Instructions Tray washing machine Modell BTA 160 / 240

Maintenance

PLEASE NOTE:

5. Clean water rinse system

Check the complete system for damage and watertightness

Check nozzles for cleanliness

Check water quantity (use the water meter or measure manually)

Check float switch function

6. Drying

Fan

Check fan for exterior damage

Check current consumption (IN see wiring diagram)

Check fan for quiet running (bearing damage) (visual and noise check)

Check suction side grid for cleanliness

Blowing box

Check fan system nozzles for damage.

Function check

The suction side temperature must not exceed

Check internal drying chamber for cleanliness

Clean internal drying chamber with hot water (remove greases and oils)

see later

7. Heat recovery

Exhaust fan

Check fan for exterior damage

Check current consumption (IN see wiring diagram)

Check fan for bearing noise (damage to bearing)

Check protection grid for cleanliness

Heat exchanger

Check heat exchanger for cleanliness

Clean heat exchanger with hot water

Check heat exchanger watertightness

Datei:BA_BTA_9668415_EN_2009-10.docx

MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121

Whenever any electrical components are disconnected and reconnected,

replaced or repaired, a safety test must be conducted, at least on these

components!!!

°C.