Table of Contents
Advertisement
Operating Instructions Tray washing machine Modell BTA 160 / 240
Datei:BA_BTA_9668415_EN_2009-10.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
14
Tips for self-help in the case of faults
Fault:
Machine does not fill.
Rinse water does not
spray!
Vapours drains!
Stripes and smears on the
tray
Formation of a significant
amount of foam in the
wash tank!
Tray not clean after
washing!
Tray is not drying!
STB has triggered!
W e reserv e the right to change execution and construction!
Remedy
• No water available
• Dirt trap blocked
• Level electrode / float valve soiled
• Solenoid valve defective
• No water available
• Dirt trap blocked
• Solenoid valve defective
• Fresh water rinse system furred
• Extraction broke down
• Curtains missing
• Temperatures too high
• Seperation panels not completely inserted.
• Wash arms, drying nozzles, air guide plates bent or
not correctly inserted
• Rinse water mineral content too high (see operating
instructions)
• Different water type depending on the waterworks
• Unsuitable rinse aid products or wrong dosage
quantity
• Incorrectly fitted or missing curtains
• Rinse water quantity too low
• Temperatures too low < 40°C
• Detergent or rinse aid product not suitable
• Wash pump not running
• Spray nozzles clogged or wrongly fitted
• Wash arms mixed up
• Pump suction sieve clogged
• Cleaning agent concentration too low or unsuitable
• Temperatures too low
• Marked foaming
• Fan motor failed
• Rinse aid concentration too low or not suitable
• Plastic material as new
• Vapour suction quantity too low
• The reason for its action must be found and
eliminated. (In particular, the condition of the heater
must be checked). The temperature safety limit switch
may only be re-set after the defect has been rectified
and the heating system has cooled down.
9668415
37/48
Advertisement
Table of Contents
