Short And Long Operation – Yes - ABB i-bus KNX Room Master Premium RM/S 2.1 Product Manual

®
ABB i-bus KNX
3.2.2.4.2 Parameter
Distinction between
short and long
operation – yes
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
If the option yes is selected with the parameter Distinction between short
and long operation, the following parameters appear:
Connected contact type
Options: closed
opened
•
closed: The input is closed with actuation.
•
opened: The input is opened with actuation.
Long operation after...
Options: 0.3/0.4/0.5/0.6/0.8 s
1/1.2/1.5 s
2/3/4/5/6/7/8/9/10 s
Here the time period T
L
operation is defined.
Note
The remaining parameter descriptions can be found in the parameter
Distinction between short and long operation –
after which an actuation is considered a "long"
no, on page 55.
60