ABB i-bus KNX Room Master Premium RM/S 2.1 Product Manual page 208

®
ABB i-bus KNX
© 2008 ABB STOTZ-KONTAKT GmbH
Commissioning
No. Function
251
Status Position top
This communication object is enabled if in parameter window K: Shutter (6 A) the parameter
Extra status response has been selected with the option End positions.
This communication object defines whether the shutter is or is not in the upper end position.
The object value is sent about five seconds after completion of a movement action.
Telegram value:
252
Status Position bottom
This communication object is enabled if in parameter window K: Shutter (6 A) the parameter
Extra status response has been selected with the option End positions.
This communication object defines whether the shutter is or is not in the lower end position.
The object value is sent about five seconds after completion of a movement action.
Telegram value:
Object name
Output K
0 = shutter not in upper end position
1 = shutter in upper end position
Output K
0 = shutter not in lower end position
1 = shutter in lower end position
Data type Flags
1 bit (EIS1) C, R, T
DPT 1.002
1 bit (EIS1) C, R, T
DPT 1.002
206