Encoder Mounting Adapter - SEW-Eurodrive DR2..71/BE Series Operating Instructions Manual

4.6

Encoder mounting adapter

If a drive was ordered with encoder mounting adapter, SEW‑EURODRIVE will deliver
the drive with enclosed coupling. Do not connect the coupling for operation without the
encoder.
4.6.1 Mounting the XV../EV.. encoder mounting adapter to DR..71 – 225, DRN80 – 225 motors
If you have ordered the XV.. or EV.. encoder mounting adapter, the adapter [A] and
the coupling [B – E] are enclosed with the motor and are to be assembled by the cus-
tomer.
The following figure shows how to assemble the coupling and the adapter:
[22]
[170] Forced cooling fan guard
[212] Fan guard with encoder mount
[220] Encoder
[225] Intermediate flange (XV1A)
[232] Screws (XV1A, XV2A)
[251] Conical spring washers (XV1A,
[226] [E] [D] [C] [B] [A]
Screw
XV2A)
Mechanical installation
[212]
[225]
[E] [D] [C] [B] [A]
[220]
[251] [232]
[361] Safety cover
[269] Grommet
[A] Adapters
[B] Retaining screw
[C] Central retaining screw
[D] Coupling (spread- or solid shaft coup-
ling)
[E] Retaining screw
[226] Screw
Operating Instructions – AC Motors
Encoder mounting adapter
[269] [22] [361] / [170]
9007202887904779
4
39