Addi-Data APCI-3010 Technical Description page 54

Standardsoftware
Functionality
54
- Interrupt available
- Available gains:
- No hardware/software trigger
- No hardware gate
b_ADDIDATA_GetAnalogInputModuleAutoRefreshInformation
Return:
- Interrupt not available
- Available gains:
- Hardware/software trigger available
- No hardware gate
- Access mode:
b_ADDIDATA_GetAnalogInputModuleSCANInformation
Return:
- Available gains:
- Hardware/software trigger available
- No hardware gate
- Single SCAN cycle mode available
-X SCAN cycle mode available
- Continuous SCAN cycle mode available
- Delay available
- Available delay timing:
- Resolution delay time:
b_ADDIDATA_GetAnalogInputModuleSequenceInformation
Return:
- Available gains:
- Hardware/software trigger available
- No hardware gate
- Single sequence mode available
- X sequence mode available
- Continuous sequence mode available
- Available delay
- Available delay timing:
- Resolution delay time:
b_ADDIDATA_InitAnalogInput
Available parameters:
- Gain: 1, 2, 5, 10
- Polarity: UnipolarBipolar
- Offset range: Not used
- Coupling DC
b_ADDIDATA_ReleaseAnalogInput
b_ADDIDATA_Read1AnalogInput
Available parameters:
- Interrupt:
- Conversion time unit:
APCI-3xxx (standard)
Function name
1, 2, 5, 10
1, 2, 5, 10
32-bit
1, 2, 5, 10
µs, ms
16-bit
1, 2, 5, 10
µs, ms
16-bit
Enabled/disabled
µs/ms