Addi-Data APCI-3010 Technical Description page 42

Functions of the board
Sequence mode with delay – example 2
The delay time after the end of one sequence to the start of the next
sequence is in this example 20 µs.
dw_NbrOfChannel
dw_SequenceChannelArray = 0, 1, 2, 3, 4
b_DelayTimeMode
b_DelayTimeUnit;
dw_DelayTime
dw_SequenceCounter
dw_InterruptSequenceCounter= 2
42
= 5
= ADDIDATAG_DELAY_MODE2_USED
= 1(µs)
= 20
= 2
APCI-3xxx (standard)