Tait TM8000 Series Service Manual page 28

Figure 1.9 Scheme for the product codes currently in use for the control head
T M A C a b
Product Families
and Categories
Product Codes
for Radio Body
28 Introduction
c c
CONTROL HEAD
Badge and branding options
0T = Tait
0U = unbadged
Options for control head
0 = no options
Type of control head
1 = blank control head
2 = two-digit-display control head
5 = one-digit-display control head
Examples of different product families within the mobile radio product
line are the T700, T2000 and TM8100 radios. The TM8100 family is
however the first to which the above product-code scheme applies.
Examples of different product categories are radio bodies, control heads,
and accessories. These are the only categories identified to date. The
product codes for the radio body and control head are discussed below;
those for the accessory items are described in the accessories manual.
The product codes for the radio body have the format:
TMABab–ccdd
where a identifies the architecture of the digital board, b identifies the
RF performance, cc is the letter-digit combination identifying the
frequency band, and dd identifies any options selected. The characters
dd are set to 00 for the default radio with no options added. For
universal options available to all Customers, the digits 01 to 99 are used
for dd. For custom options implemented for particular Customers, the
letters AA to ZZ are used. The digits and letters identifying the universal
and custom options are assigned sequentially.
product codes in use at the time of publication.
Figure 1.8 illustrates the
TM8100 Mobile Radio Service Manual
May 2004 © Tait Electronics Limited