Notes - Cessna SKYMASTER 336 1964 Service Manual

NOTES
1. WIRE CODE DESIGNATIONS
PER CES 1100.
2. WIRE CODE APPLICATION AND WIRE LENGTH TOLERANCES PER CES 1015.
3. "S" SUFFIX ON WIRE GAUGE IN WIRE TABLE DENOTES SHIELDED WIRE.
4. NON-SHIELDED
WIRES TO BE PER MIL-W-5086A.
A5. SHIELDED WIRES TO BE PER MIL-C-7078A, TYPE II CABLE
6. WIRES NOTED HEREIN AS "(OPT)" ARE OPTIONAL TO THE STANDARD AIRPLANE.
7. ALL WIRES NOT SPECIFIED AS "(OPT)" ARE TO BE INSTALLED AS STANDARD EQUIPMENT.
THE AIRPLANE ASSEMBLY WILL SPECIFY THE ADDITIONAL EQUIPMENT REQUIRED FOR
DELUXE VERSIONS.
8. WHEN "(OPT)" IS USED IN THE TITLE BLOCK OF A DIAGRAM, ALL WIRES SHOWN THEREIN
ARE OPTIONAL EXCEPT WHERE NOTED AS "(STD)".
9. ALL WIRES TO BE TYPE I UNLESS OTHERWISE NOTED IN WIRE TABLE.
10. PART NUMEBRS SHOWN IN THE EQUPMENT TABLE OF THE VARIOUS PAGES ARE FOR
REFERENCE
ONLY AND DO NOT CONSTITUTE A MATERIAL REQUIREMENT UNLESS SPECIFICALLY
NOTED.
REFER TO THE VARIOUS EQUIPMENT INSTALLATION DRAWINGS FOR VERIFICATION
OF PART NUMBERS.
11. VENDOR CODES PER S-1400. VENDOR CODES ARE IN PARENTHESES.
Cessna.
DRAWING NO.
DRAWN
Harden
TITLE:
WIRING DIAGRAM---
1470000
DATE
4-30-621
MODEL 336
APP'D
REV:
"A"
CESSNA AIRCRAFT CO., COMMERCIAL AIRCRAFT DIV.,
WICHITA, KANS.