Using Your New Projection Tv; Watching The Tv - Sony KP-57XBR10W Operating Instructions Manual

Using Your New Using Your New Using Your New Using Your New
Projection TV Projection TV Projection TV Projection TV

Watching the TV

Many TV features can be accessed directly
through the remote control. The following will
explain the function of some buttons found on your
remote control.
26
Using the white labeled buttons for Using the white labeled buttons for
Using the white labeled buttons for Using the white labeled buttons for
projection TV operations projection TV operations projection TV operations projection TV operations
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE INSIDE FRONT
COVER OF THIS MANUAL AS YOU REVIEW THE
FOLLOWING DESCRIPTIONS
TV (FUNCTION)
Activates the remote control for use with the
projection TV.
ANT
— (AUX input)
Press to change between the VHF/UHF input and
the AUX input. (for detailed connection
information, see "Cable and antenna" on page 8 or
"Cable box and cable" on page 9).
TV POWER
Turns the projection TV on and off. If a video
input indication (e.g., VIDEO 1, VIDEO 2)
appears on the screen, press TV/VIDEO until a
channel number appears.
0 - 9 and ENTER
Use for direct channel selection. Press 0-9 to select a
channel (for example, to select channel 10, press 1
and 0). The channel will change after 2 seconds, or
you can press ENTER for immediate selection.
CH +/–
Press to scan through the channels (+ up or –
down).
VOL +/–
Press to adjust the volume (+ up or – down).
JUMP
Press to alternate or jump back and forth between two
channels. The projection TV will jump between the
current channel and the last channel selected using the
0-9 buttons.
MUTING
Press to mute the sound. "MUTING" will appear on
the screen and will dim three seconds later. To restore
sound, press again or press VOL +.
FREEZE
— (yellow labeled button)
This is useful when you need to copy down
information that appears on the TV's screen.
Press to freeze the picture.
Press again or press (OFF) to cancel.
If you select TWIN as a FREEZE MODE in the
SET UP menu, you can freeze the desired scene
and display it on the left while viewing the normal
picture on the right. (see "FREEZE MODE" on
page 46)