Adjusting The Convergence Automatically (Flash Focus) - Sony KP-57XBR10W Operating Instructions Manual

If your projection TV is not If your projection TV is not
If your projection TV is not If your projection TV is not
connected to a cable system connected to a cable system connected to a cable system connected to a cable system
If you perform AUTO SET UP, CABLE is set to
ON automatically. After finishing AUTO SET UP,
set CABLE to OFF in the CHANNEL SET UP
menu, then set AUTO PROGRAM to YES to
perform automatic channel presetting. (see
"CABLE" and "AUTO PROGRAM" on page 42)
To perform AUTO SET UP again To perform AUTO SET UP again
To perform AUTO SET UP again To perform AUTO SET UP again
• Press SET UP inside the drop-down panel on the
projection TV, and perform steps 3-5 on page 24.
• Press CHANNEL + or CHANNEL
language.
–
• Press VOLUME to restore factory settings
("CONTINUE TO AUTO PROGRAM?" will
appear on the screen. Press CHANNEL + to
–
execute or CHANNEL to exit).
• Press SET UP to exit.
Adjusting the
Convergence
Automatically (FLASH
FOCUS)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to adjust
the convergence automatically.
Tip z
It is recommended to perform
30 minutes after the projection TV is first turned on.
SET UP
–
to select a
1
Receive a TV or cable TV program.
2
Press FLASH FOCUS for every wide screen
mode; NORMAL, WIDE ZOOM, ZOOM and
FULL.
To select the wide screen mode, press WIDE
MODE on the remote control.
FLASH
FOCUS about
POWER
FLASH FOCUS
TIMER/
STAND BY
STEREO
FLASH FOCUS
VOLUME CHANNEL
+ +
TV/VIDEO
– –
WIDE
MODE
1 2 3
4 5 6
FLASH FOCUS
The cross pattern appears and FLASH FOCUS
begins to work. The adjustment is completed
when the cross pattern becomes white.
To obtain an optimum convergence To obtain an optimum convergence To obtain an optimum convergence To obtain an optimum convergence
for Digital TV programs for Digital TV programs
for Digital TV programs for Digital TV programs
The optimum convergence alignment varies with
digital TV formats. Whenever you find that the
picture blurs, press FLASH FOCUS.
Notes:
• You cannot perform any other functions until
FLASH
FOCUS has completed its cycle.
• If you perform any other operation while FLASH
FOCUS is in progress, FLASH FOCUS operation is
canceled.
25