Using The Channel Set Up Menu - Sony KP-57XBR10W Operating Instructions Manual

mode manually by pressing the WIDE MODE
button repeatedly.
WIDE MODE
— Manually selects the wide screen mode
You can select NORMAL, WIDE ZOOM, ZOOM
or FULL for the 4:3 or letterbox picture to fill the
16:9 screen manually by pressing the WIDE
MODE button repeatedly. (for details on each
mode, see "Watching the Picture in Wide Screen
Mode Automatically — AUTO WIDE" on page
28)
V CENTER
— Adjusts the position of the picture
Allows you to move the picture vertically within
the screen (available only in ZOOM and WIDE
ZOOM modes).
Move the joystick up or down to move the picture,
and press .
Using the CHANNEL
SET UP Menu
CHANNEL SET UP
CHANNEL SKIP
CHANNEL CAPTION
CABLE :
AUTO PROGRAM
FAVORITE CHANNEL : AUTO
CHANNEL FIX : OFF
Move Select Exit MENU
For detailed information on using the remote
control to modify menu settings, refer to "Learning
Menu Selection" on page 35.
To select the CHANNEL SET UP To select the CHANNEL SET UP
To select the CHANNEL SET UP To select the CHANNEL SET UP
menu: menu: menu: menu:
Display , Highlight
MENU
CHANNEL SKIP
— Skips unnecessary channels
After AUTO SET UP, you
CHANNEL SKIP
can erase unnecessary TV
channels from the channel
preset memory.
With the CHANNEL SKIP
Select a channel
window open: Move
1 Move the joystick up or down to select the
desired channel. You can view the channel that
is selected with the CHANNEL SKIP menu in
the center sub screen. You can also use CH +/–
or 0–9 and ENTER buttons.
2 Press .
ON 3 Move the joystick up or down to select YES,
and press
The selected channel will be erased.
If you want to re-enter the skipped channel, follow
the steps above and select NO.
CHANNEL CAPTION
— Easy recognition of the channel you are
watching
You can add a caption for
up to 32 channels of both
VHF/UHF and AUX
inputs.
, Select
With the CHANNEL
CAPTION window open:
1 Press
down to select the desired channel. You can
view the channel that is selected with the
CHANNEL CAPTION menu in the center sub
screen.
2 Press
.
3 Move the joystick up or down to display the
1 : NO
2 : NO
first letter or number of the caption and press
3 : NO
4 : NO
to select it.
5 : NO
6 : NO
7 : NO
4 Repeat until up to four digits are selected.
8 : NO
MENU
Select Exit 5 Press .
To erase a caption, press RESET.
.
CHANNEL CAPTION
CHANNEL : – – –
CAPTION : – – – –
Move Select Exit
and then move the joystick up or
(continued)
MENU
41