The involved parameters are:
I.R. Intensity
Cut-Off Time
Experiment Number
Gender
Sequence Number
MiniPrinter
5.7.1
From the Memory Key to the Instrument
With the memory key inserted in its slot on
the front panel, depress F1 (OPR), F2
(SET) and F3 (CFG).
CONFIGURATION" window ap-
The
"READING
pears; after some seconds, select the de-
sired configuration by the F1 (UP ) or F2
(DWN) key, then confirm the selection by
the F3 (OK ) key.
Under the configuration name, for example
"CONFIG01.CFG", the related date appears
(save date).
If the configuration is not present, the cap-
PRESENT" appears instead of the
tion
"NOT
date.
5.7.2
Uploading
If the configuration is present, it can be uploaded and the instrument parameters can be
changed, by depressing F1 (CHG).
"CONFIGURATION
The caption
CHANGED" confirms the change.
37370 Instruction Manual (Rev. 0)
Page 15