Data Acquisition & Data Print-Out; Data Portability - UGO BASILE 37370 Instruction Manual

MEM
MPR
MSK
NO
NUL
OK
OPR
OUT
PRN
RES
STR
STP
UP
V.W
YES
>
3 DATA ACQUISITION & DATA PRINT-OUT
The Plantar Test is a microprocessor controlled unit. The experimental data, stored in the
37370 internal memory and shown on its graphic display, can be directly exported to PC.
The USB connector type B connects directly into the PC USB port. This connector is lo-
cated on the instrument back panel (see paragraph 4.6.1). The connection to PC is also
possible via the serial port RS 232 C by the Delta 9-pin female connector (COM 1).
Communication is managed by the dedicated CUB Package Cat. 52050-10, supplied as
standard.
CUB 52050
The is a Windows® based Data Acquisition Software Package, which ena-
bles the research worker to route to the PC the data originated by all Ugo Basile instru-
ments and store them into individual files, ready to be easily managed by most statistical
analysis packages available on the market. See also paragraph 4.7.
Ask for details!
3.1

Data Portability

Data portability is arranged via the
ard package. Via the USB slot provided on the front panel, all the experimental data of
one or more sessions can be easily uploaded on the pen-drive, see B, Figure 2, in para-
graph 3.2
Programming the experiment layouts from a remote PC is also made easy by the use of
the pen-drive.
Memory menu
MiniPrinter
Memory stick
No
Annulment
Confirm
Operation menu
Out
Data printing selection
Data memory reset
Start
Stop
Increment
Data view
Yes
Shift to right
USB pen-drive (E-AU 041)
37370 Instruction Manual (Rev. 0)
provided with the stand-
Page 5