Memory Management - UGO BASILE 37370 Instruction Manual

Page 19
37370 Instruction Manual (Rev. 0)
7

MEMORY MANAGEMENT

Each datum point, no matter whether print-
ed or sent to the PC, is saved in the
memory (which can store about 300
measures, including the datum proper and
the date/time indication).
By depressing the F3 (MEM) key from the
MEMORY
main menu, the Menu can be
reached.
The F1 (VW ) key enables the operator to visualize on the data stored in the memory,
each datum complete with acquisition Date & Time. The top datum, is the last datum
which has been memorized.
Use the vertical-arrow keys F1 (UP ) or F2
(DWN) to scan the data; by momentarily
depressing the key, the displayed datum
will increase (or decrease) of one meas-
urement.
Keeping these keys depressed longer will
scan the data.
As usual the F4 (ESC) recalls the previous menu software.
MEMORY Menu, the F2 (OUT) key enables the researcher to export the data
From the
stored in the memory to the Memory Key or to print them on the Mini-Printer.
You can now select the data output path, see paragraph 6, by depressing:
F2 (EPR) to select an External Printer (*) via
COM2, located on the back panel, see par-
agraph 4.6.1.
(*) customer printer connected in serial on
COM2 at 9600 baud-rate
F3 (MSK) to select the Memory Key, inserted in its slot on the front panel.