Table of Contents
Advertisement
FW-7573 User Manual
To access some components and perform certain service procedures, you must perform the following
procedures first.
Warning: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
1.
Unpower the FW-7573 and remove the power cord.
2.
Unscrew 2 screws on each side and the rear of the top cover of the FW-7573 System.
3.
Slide the cover backward to open it.
The motherboard supports DDR3 memory that features data transfer rates of 1333, 1600 MHz to meet the
higher bandwidth requirements of the latest operating system and Internet applications. To install the
memory:
1.
Open the DIMM slot latches.
2.
Install the DIMM.
16
Advertisement
Table of Contents
