Setup Program
You need to run the Setup program on the Diagnostics
diskette to set the date, time, and store information
*1^
about some installed options. A battery keeps a small
'
portion of memory active to retain this data even when
the power is off. Run the Setup program when you:
• Install your system unit for the first time
• Install certain options
•
Wish to set date and time
• Wish to set the display mode
• Replace the battery.
O
To set the system options you must know which options
are installed. These options are listed on the "Setup
Information" foldout in this manual.
1
Turn off the system unit.
2 Turn off all external options (printer, display and
others).
Get the Diagnostics diskette located at the back
of this manual.
Getting Started
2-13