Timer: Setting The Heating Mode - Webasto UniControl Operating Instructions Manual

Press the control knob.
X X
"Add timer" message (if no timer has been saved yet) appears
in the display.
Press the control knob in order to add new timer.
X X
Turn the control knob in order to choose "Day".
X X
Press the control knob in order to confirm selection.
X X
Turn the control knob in order to choose the switch-on time
X X
of an hour.
Press the control knob in order to confirm selection.
X X
Setting the switch-on time for minutes is done in the
same way as the switch-on time for hours.
Turn the control knob in order to choose the switch-off time
X X
of an hour.
Press the control knob in order to confirm selection.
X X
Setting the switch-off time for minutes is done in the
same way as switch-off time for hours.
Depending on the required setting, either:
set heating mode: see „8.2 Timer: Setting the heating mode:" on page 16.
X X
set ventilation mode, see „8.3 Timer: Setting the ventilation mode" on page 17.
X X
8.2

Timer: Setting the heating mode:

3
Only for air heaters with selectable heating level:
Turn the control knob in order to choose the desired heating
X X
level.
Press the control knob in order to confirm selection.
X X
3
Only for air heaters:
Turn the control knob in order to choose the desired tem-
X X
perature.
Temperature range: 5 - 35 °C, 41 - 95 °F
Timers
Add timer
Timers
Mon
Day
Timers
Start time
Timers
Stop time
Timers
Normal
Timers
Temperature
16