Table of Contents
Advertisement
HE-VA Auto-Controller AC-Lite - May 2016
Set Low Fan Speed Alarm
1. Select the
2. Hold CAL to enter programme mode 1.
The alarm threshold is displayed after 3 seconds.
Continue holding the button and...
3. PRESS
to select the digit or decimal point to
change.
4. HOLD
to change the selected digit
(or move the decimal point).
5. RELEASE
repeat as above, otherwise simply release
both buttons. The instrument will then return
to the normal display mode.
22
channel.
to select the next digit and
2
Figure 20: Low speed alarm
threshold
2
Figure 21: Set low speed alarm
threshold
3
1
4
5
Advertisement
Table of Contents
