6. Drilling Rate Functions
6.1 View Drilling Rate
This channel displays the current drilling rate
in Kg/Ha only.
The resolution for Kg/Ha units is:
0 to 24.9
25 to 250
250 to 9995
6.2 Adjusting the Drilling Rate
Press the RATE - button to decrease the
drilling rate.
Press the RATE + button to increase the
drilling rate.
The rate adjusts by the % step programmed
in programme mode 3, i.e. 5%, 10%, 15%,
20% or 25% of the programmed target or
base drilling rate.
6.3 Drilling Rate Indicator
The left indicator is used to remind the
operator of his drilling rate. When the
indicator is in position 2, then the Multi-Seeder
is operating at the target rate.
If the indicator is in position 1 then the actual
rate is increased from the target rate.
If the indicator is in position 3 then the actual
rate is decreased from the target rate.
0.1 Kg
1 Kg
5 Kg
HE-VA Auto-Controller AC-Lite - May 2016
Figure 14: View Drilling Rate (kg/ha)
Pos. 1
Pos. 2
Pos. 3
17