Navigation And Editing - Graco E-Flo 24P821 Instructions-Parts List Manual

Operation
Screen Navigation Navigation and
Screen Screen Navigation
Refer to this section for instructions on navigating
screens, entering information, and making selections.
All Screens Screens
All All Screens
• Use the up and down arrow keys
between screens.
• Press the enter screen key
The first data field on the screen is highlighted.
• Use the arrow keys
that you want to change.
• Press the enter key
• Press the cancel key
• When all data is correct, press the exit screen
key to exit the screen. Then use the up and
down arrow keys
screen, or the toggle icon
Setup screens and Run screens.
Menu Menu Fields Menu Fields Fields
• Use the up and down arrow keys
highlight the correct choice from the menu.
• Press the enter icon
Number Number Fields Number Fields Fields
• The first digit in the field is highlighted. Use the
up and down arrow keys
number.
• Press the right arrow key
digit.
• When all digits are correct, press the right arrow
key again to accept.
8
and Editing Editing
and Editing
to move
to enter a screen.
to highlight the data
to edit.
to cancel.
to move to a new
to move between
to
to select.
to change the
to move to the next
Check Box Check Check Box Fields Box Fields Fields
A check box field is used to enable or disable features
in the software.
• Press the enter key
and an empty box.
• The feature is enabled if a check
Reset Field Reset Reset Field Field
The reset field is used for totalizers. Press the
totalizer reset key to reset the field to zero.
Initial Setup Initial Initial Setup Setup
NOTE: Before creating the pump profiles in Setup
NOTE: NOTE:
Screens 1 through 4, you must set up the system
parameters in Setup Screens 5 through 22, as
follows.
1. Press the lock icon
screens. Setup Screen 1 appears.
2. Scroll to Setup Screen 5.
3. See Setup Screen 5, page
lower used in your system.
4. Continue setting the system parameters
on Setup Screen 6, page 15
Setup Screen 22, page
5. Scroll to Setup Screen 1. Establish
the profiles for each pump. See
Setup Screen 1, page 12
Setup Screen 4, page
to toggle between a check
is in the box.
to enter the Setup
15, and select the
through
22.
through
14.
3A2527H