Scan mode image
1600 × 1200
1680 × 1200
MULTI DISPLAY SETTING
USER CONFIGtMULTI DISPLAY SETTING
M U LT I D I S P L AY E N A B L E :
M U LT I D I S P L AY:
S U B I N P U T S E L E C T :
P O S I T I O N :
F R A M E :
S U B P I C T U R E S I Z E :
WAV E F O R M :
1920 × 1080
1920 × 1134
1920 × 1200
1920 × 1080
1280 × 720
Selects ON to display the multi display
and OFF not to display.
When the frame frequency of the main
display is different from that of the sub
display, the picture may be disturbed.
When no signal is input to the main
display, the picture may not be displayed
• PIP/POP: The sub display is put in
the main display for the 16:9 display
and by the side of the main display
for the 4:3 display.
• SIDE BY SIDE: The main display is
put in the left side of the display and
the sub display is put in the right side
of the display.
When the HD15 or DVI signal is input to
the main display, SIDE BY SIDE cannot
be selected on the menu.
Sets the input signal of the sub display.
You can select from among
COMPOSITE, Y/C, RGB,
COMPONENT, OPTION A-1, OPTION
A-2, OPTION B-1, OPTION B-2,
VIDEO WAVE and OFF.
The multi display with COMPOSITE
and Y/C, RGB and COMPONENT,
OPTION A-1 and OPTION A-2, and
OPTION B-1 and OPTION B-2 is not
displayed. When SUB INPUT SELECT
is set to OFF, the sub display is not
displayed even if you set MULTI
DISPLAY ENABLE to ON.
Sets the position of the sub display. You
can select from among 1 to 3 for the 4:3
display and 1 to 4 for the 16:9 display.
• 1: Bottom
• 2: Center
• 3: Top
• 1: Bottom left
• 2: Bottom right
• 3: Top right
• 4: Top left
Sets the position of the main display
when MULTI DISPLAY is set to POP
and the sub display is put on the 4:3
• RIGHT: The main display is put by
the right side of the sub display.
• LEFT: The main display is put by the
left side of the sub display.
Sets the size of the sub picture. You can
select from among 1 to 3. When the
setting is high, the size becomes large.
Adjustment Using the Menus