To view SXGA signals when the DVI input is selected,
1
use the cable within 3 m (118
inches) in length.
/8
*1
For acceptable formats, refer to “About the preset signal”
on page 33.
Optional slot for the video signal
One optional input adaptor can be attached. The
composite, Y/C, component, analog RGB or SDI signal
can be input depending on the input connectors of the
board to be used.
*2
Multi-format
NTSC or PAL color system or DTV format, such as
720P, 1080i, etc. can be selected automatically.
*2
For acceptable formats, refer to “Available signal formats”
on page 31.
External sync input
The unit can be operated on the sync signal supplied
from an external sync generator.
Functions
APA (Auto Pixel Alignment) function
You can display pictures from the HD 15 input
connector in the appropriate picture by simply pressing
the APA key.
Automatic termination (connector with
mark only)
The input connector is terminated internally at 75 ohms
when nothing has been connected to the output
connector. If a cable is connected to the output
connector, the internal terminal is automatically
released and the signals input to the input connector are
output to the output connector (loop-through).
Select color temperature and gamma mode
You can select the color temperature from among three
(HIGH, LOW, LOW2) settings and gamma mode from
between two settings (2.2, DICOM). You can also adjust
the color temperature to the appropriate setting in
“USER”.
Two-display
Two kinds of input signals are put on the monitor.
For more information, refer to MULTI DISPLAY of
“MULTI DISPLAY SETTING” on page 25.
Color space feature
You can select ITU-R BT.709 for the color space
settings.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input signal.