Figure 40. Remove the system board
Disassemble the LCD module
The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the base cover.
Remove the LCD bezel and hinges
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 31
"Remove the battery pack" on page 32
"Remove the LCD module" on page 44
Step 1.
Use a prying tool to remove the strip cover.
Figure 41. Pry off the strip cover
Step 2.
Insert your fingernails under the lower inner side of the LCD bezel and then carefully pull the LCD
bezel outwards. Repeat this action along the inner edges of the LCD bezel until all hooks that
secure the LCD bezel are detached.
50
Hardware Maintenance Manual