Figure 3. Remove 10 screws
Screw specifications
M2.0 x 5.5
Step 3.
Remove the lower case.
Figure 4. Remove the lower case
Remove the battery pack
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 31
Step 1.
Disconnect the cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
32
Hardware Maintenance Manual
Number of screws
10
Need help?
Do you have a question about the IdeaPad S540-14 Series and is the answer not in the manual?
Questions and answers