Charging The Vacuum Pump Battery - OHIO WILLOW WOOD LimbLogic VS Series Prosthetist's Manual

Charging the Vacuum Pump Battery

Vacuum Pump
charging port
charging plug
Align the
mark on the plug
with the
mark on the port.
1. Remove the cap from the charging port on the Vacuum Pump.
2. Insert the charging plug into the charging port as follows:
a) Gently insert the plug into the port, holding the black plastic
portion of the plug, with just enough force to feel the plug touch
the port.
b) Align the green alignment marks on the charging port and the
charging plug.
The charging plug can only be inserted into the Vacuum
Pump charging port in one orientation. Forcing the plug will
damage the plug, will possibly damage the vacuum system,
and will void the warranty.
3. Plug the charger into a power outlet. The
adapter will light, followed by the
battery charging indicator.
green
If the
the light comes on.
4. When charging is complete, the
the power cord from the Vacuum Pump and from the power outlet.
Charger
charger node
green
green
LED does not light, press and hold the reset button until
reset button
blue light on the two-pronged
green
LED. The fob will display the
green
LED will flash. Disconnect
9
Overview
To
AC
outlet
Green LED
SOLID = charging
FLASHING = charged