For Bilateral Applications; Standby Mode - OHIO WILLOW WOOD LimbLogic VS Series Prosthetist's Manual

Overview

For bilateral applications:

The Information Screen displays right and left indicators to show
which pump is currently communicating with the fob.
Use the right/left buttons to select the right or left Vacuum Pump, then
press the center button to save your selection.
The LimbLogic VS logo will appear, followed by the Information
Screen for the selected pump.
B) Standby Mode
Allows you to turn off the pump temporarily to prevent the pump from
regulating the vacuum.
To enter Standby Mode, press and hold the center button until
the hourglass symbol appears.
The standby indicator will then appear to indicate that the
pump is not regulating.
To return to Active Mode, press and hold the center button until
the hourglass symbol appears.
After six hours of Standby Mode without radio communication, the
unit will turn off. To turn the pump back on, either press the on/off
button on the Vacuum Pump one time or plug in the charger.
Keep in mind that a Vacuum Pump in Standby Mode will
continue to use the pump battery.
In this example, the fob is
communicating with the
RIGHT pump
In this example, the fob is
communicating with the
LEFT pump
14