Overview
Quick-Start Guide
1. Turn on the Vacuum Pump.
2. Start regulating the vacuum.
3. Information about the system is displayed.
current upper
set point
(press up and down
buttons to adjust,
and center button
to confirm)
4. To enter Standby Mode:
To resume vacuum regulation:
5. Turn off the Vacuum Pump.
Press
one time
Press
or
one more
time
current vacuum level
Press
center button
until
appears
Press
center button
until
appears
Press
two times
4
Press and hold
center button
until LimbLogic VS
logo appears
in display
Vacuum Pump
battery charge level
Standby
Mode