Table of Contents
Advertisement
Information Screen
The Information Screen indicates important details about the operation of
the system.
The vertical bars inside the battery symbol on the right side
of the screen indicate the amount of charge left in the Vacuum
Pump battery.
As the battery is discharged, the bars disappear from left to right
A) Active Mode
When numbers are displayed to the left of the battery symbol, as
shown below, the system is in Active Mode. In this mode, the Vacuum
Pump activates as needed to maintain the vacuum settings.
current upper
You or the patient may use the up/down buttons to adjust the Upper
Set Point as desired. This is the only setting the patient may adjust.
The Upper Set Point cannot be set higher than the User Maximum.
Press the center button to save the change. The hourglass
symbol will appear to indicate that the setting is being saved.
set point
current vacuum level
13
Overview
.
Advertisement
Table of Contents
