Hach sension1 Instruction Manual page 17

SECTION 1,
continued
Item No. Description
1 Indicates meter is in Calibration mode. If the
2 Indicates meter is in Calibration Review mode.
3 (NA) Indicates data is being sent to a printer/computer.
4 (NA) Indicates recalled data that is currently displayed is being erased.
5 Indicates meter is in Setup mode.
6 (NA) Indicates all data points are being printed or erased.
7 Numerical field that displays Setup, Sample, and Standard numbers when those words are
displayed with the number. If
Standard 1.
?
8 Flashing
key.
EXIT
9 Indicates the meter is measuring a sample (sample number is displayed to the right).
10 Indicates the meter is measuring a standard (standard number is displayed above).
11 Indicates the displayed number is the electrode slope.
12 Numerical field that displays the slope and pH or mV values of standards and samples.
13 Indicates measurement units (pH or mV).
Default
14 When
temperature correction for the pH value.
15 Temperature units (choice of °C or °F).
16 Indicates the value displayed in small numerical field (item 17) is in millivolts.
17 Numerical field that displays temperature value.
18 (NA) Indicates meter is using AC power (only displayed when in the docking station).
19 Indicates an inactive key has been pressed and that function is not allowed.
20 Indicates ENTER key is active.
21 Indicates arrow keys are active.
22 (NA) In Setup mode, it indicates the date is being set.
23 Indicates EXIT key is active.
24 Indicates temperature compensation is being used.
25 (NA) Indicates numeric part of the keys is active.
26 Display Lock icon. Displayed with item 27.
27 Indicates whether Display Lock setting is
28 Faulty probe connection or incorrect probe attached. May also indicate the calibration is
questionable. Usually displayed with an error code.
29 Low battery icon. Change batteries as soon as possible.
30 Indicates a meter function problem.
Table 2 Main Display Elements
Standard
and CAL indicate calibration is necessary. Also a prompt to press the
is displayed, the meter is using the default temperature value to calculate the
?
is flashing, calibration is necessary.
1
and are displayed, the meter is measuring
On Off
or .
17
or
ENTER