Setting The Clock - Sony GigaJuke NAS-E35HD Operating Instructions Manual

Setting the clock

The time on the clock must be correctly set for the
proper operation of functions. Do the procedure
below to set the clock.
1
Press  (power) to turn on the
unit.
2
Press CLOCK/TIMER SET.
If the current mode appears on the display,
press / repeatedly to select "CLOCK
SET?", and then press ENTER.
3
Press  /  repeatedly to set the
hour, and then press ENTER.
4
Do the same procedure to set the
minutes.
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.
To display the clock when the unit is
turned off
Press DISPLAY. The clock is displayed for about 8
seconds.
1
GB