Listening To Music Of A Usb Device - Sony GigaJuke NAS-E35HD Operating Instructions Manual

Listening to music of a USB device

You can connect an optional USB device to the
(USB) port on the unit and listen to music stored
in the USB device. For details on the USB device
that can be connected to this unit, see "USB
devices supported by this unit" (page 71).
The audio formats that can be played back by this
unit are MP3*, WMA* and AAC*.
* Tracks with copyright protection (Digital Rights
Management) cannot be played by this unit.
Tracks downloaded from Internet websites (including
online music stores) may not be played by this unit.
USB
Numeric
buttons
 /  /  /  /
ENTER
/
/

1
Connect an optional USB device to
the (USB) port on the unit.
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
Refer to the operation manual of the USB
device for details on the operation.
When the USB device is connected,
"Reading" appears, followed by the volume
label.
3
GB
It may take about 10 seconds before "Reading"
appears depending on the type of USB device
connected.
2
Press USB  to start playback.
Track name
Track number in
the folder
Other operation
To
+/ –
Stop playback

Pause playback

Find a point in a
track
Select the previous/
next track
Select a track
Note
Playback indication
and audio format
Do the following
Press .
Press . Press  again or
 to resume playback.
Press and hold down
/ during playback,
and release it at the desired
point.
Press / during
playback.
Press /// to
select a track. Or press the
corresponding numeric
button* , and then press
ENTER.
Folder name
Time information
(elapsed time)